WATCH ADJUSTMENT INSTRUCTIONS

WATCH ADJUSTMENT INSTRUCTIONS

 

1: On the inside of the bracelet, you’ll find small arrows on each removable side that indicate the direction in which the pins should be pushed out.

 

2: Next, position the bracelet or strap in the tool so the pin can be pushed out in the correct direction. (Ensure you align with the hole/pin accurately to avoid bending or breaking the pin.)

 

 

3: Remove the desired number of links. We recommend removing an equal number of links from both sides.

 

 

4: Once you’ve removed the desired number of links, reinsert the pin in the same way it was removed. If the pin sticks out slightly afterward, you can press or hammer it fully into place using the base of the tool.

 

 

5: Below, you’ll find an instruction video demonstrating the process on the Lumen White watch.